Wgląd w przyszłe trendy w branży tulei gumowych i inspirowanie do innowacyjnej mądrości

Insight into the future trends of the rubber bushing przemysł, inspire innovative wisdom, and enable enterprises to obtain soft texture and high stability when choosing rubber bushings, allowing them to have more knowledge in improving production efficiency.

Increase the load on the rubber plate to avoid serious problems such as stretching, bending, and tingling caused by excessive stretching of the rubber bushing;

Increase the thickness of the rubber plate, increase the deformability of the rubber plate, and correspondingly change the stiffness and hardness of the steel pipe;

For the base of the rubber plate, set a liner size that matches the stiffness size and inner diameter size;

The length of the rubber bushing is limited, but its length does not exceed half of its length;

If the rubber bushing exceeds the spherical ring groove of the steel ring groove, it shall be replaced with a new one;

The rubber bushing has been in the maintenance position for a long time, and once a problem occurs, immediately find a solution;

Parts with rubber bushings exceeding the diameter of the cylindrical disc by 20, 30, Lub 225 cannot be disassembled due to the small or large number of cylinders on the spool;

The rubber bushing exceeds a part of the steel wire rope in regular processing work, so it needs to be treated with anti-corrosion treatment.

Aramid liner: A rubber bushing used for integral molding, with one of its high elastomers. Before painting, it should be peeled off to reveal its original properties.

rubber bushing: using wooden sleeve method: raw rubber raw materials 3~Rubber can be made according to customer needs and different thicknesses.

Bushing dynamic stiffness test Part 1: Maximum test force&flash; Drugi: Maximum test force&ads; 3rd: Elastic modulus~15T,<S; 3:1 (czerwony)+szary 2:3 (biały)+żółty.

Bushing torsion test Part 1: Maximum test force<S; 2nd (3rd)+red+gray+black+green+purple+blue+white.

● Maximum test force<S; 10~30A-3 test force<S; 10A-3 cable clamp S, shaft sleeve torsion, torsional failure, and corner control test; 10A-1 output torque test force<S; 10A-2 microcomputer controlled flange mounted ammeter equipped with intervention test method; The operating ammeter is equipped with experimental instruments that comply with relevant standards; 10A-3 Test the insulation resistance, dielectric constant, tworzywo, corona, itp. at the connection; 7-material epoxy stainless steel, Japanese Shinyue rubber and plastic products; 8. Welding materials such as silicone acetone, silicon steel, alloy, magnetism, radiation resin, itp; 8 tensile machines, fastening systems, testing and calibration instruments, itp; 10A – (capable of connecting to various models) testing machine; 10A – (mainly dynamic testing from ordinary materials to high-temperature applications.